Filter
Top Products
82 Intel Blade Server Fibre Channel Switch Module SBCEFCSW / FC Expansion Card SBFCM Guide
Active Zoneset Data window
The Active Zoneset Data window displays the zone membership for the active zone set that resides on the
fabric management switch. The active zone set is the same on all switch modules in the fabric. You can
confirm this by adding a fabric through another switch module and comparing Active Zone Set displays.
To open the Active Zoneset Data window, click the Active Zoneset tab below the data window in the
Topology window. See “Zoning a fabric” for more information about zone sets and zones. See “Configured
Zonesets Data window” on page 96 for information about the zone set definitions on a specific switch module.
The Active Zoneset data window, shown in Figure 9 uses display conventions for expanding and contracting
entries that are similar to the fabric tree. An entry handle to the left of an entry in the fabric tree indicates that
you can expand the entry. Click this handle or double-click the following entries to expand or contract them:
• A zone set entry expands to show its member zones.
• A zone entry expands to show its member ports.
• A port entry expands to show the port Fibre Channel address.
• A Fibre Channel address entry expands to show the port worldwide name.
Figure 9. Active Zonesets window
Zoning a fabric
Fibre Channel fabrics use zoning to restrict or extend access to devices in the fabric. A zone is a named group
of devices that can communicate with each other.
You can use zoning to divide the ports and devices of the fabric into zones for more efficient and secure
communication among functionally grouped nodes. You can set the Auto Save and Default Visibility zoning
configuration parameters using the SAN Utility or the Set Config Zoning command. See “Auto save” on page
84 for information about the Auto Save parameter, see “Default visibility” on page 84 for information about
the Default Visibility parameter, and see “Using the Zoning Config window” on page 85 for information about
the Set Config Zoning command.
Zoning concepts
The following zoning concepts provide some context for the zoning tasks described in this section:
•Zones
• Aliases
•Zone sets
• Zoning database
• Zoning configuration