Filter
Top Products
147
Expansion card error messages
Switch module x was installed Information only. Take action as required.
Switch module x was powered on Information only. Take action as required.
Switch module x was powered on Information only. Take action as required.
Switch System running nonredundant
switch modules
Information only. Take action as required.
Switch module%d IP configuration was
changed
Information only. Take action as required.
ENET [X] DHCP HSTN=X, DN=X, IP
@= XXX.XXX.XXX.XXXGW @=
XXXX.XXX.XXX.XXX, SN=
XXX,XXX,XXX,XXX, DNS1@=
XXX.XXX.XXX.XXX
Ethernet configuration information. Take action as required.
ENET [X] IP Cfg:HstName= XXXX,
IP@= XXX.XXX.XXX.XXX ,GW@=
XXX.XXX.XXX.XXX, NetMsk=
XXX.XXX.XXX.XXX Switch module x
was installed
Ethernet configuration information. Take action as required.
LAN: Ethernet [x] interface is no longer
active
Check cables to switch.
LAN: Ethernet [x] interface now longer
active
Information only. Take action as required.
✏ NOTE
See Chapter 6, “SBCEFCSW / SBFCM Parts listing,” on page 153 to determine which components
should be replaced by a field service technician.
Message Action
✏ NOTE
See Chapter 6, “SBCEFCSW / SBFCM Parts listing,” on page 153 to determine which components
should be replaced by a field service technician.
Message Action
At the Expansion Card BIOS screen the
message "ERROR PC
CONFIGURATION ERROR" appears.
1. Replace the Expansion Card
2. Replace the Blade server