Intel SBCEFCSW Stereo Receiver User Manual


 
13
Fallback command
Loads the fallback version of the firmware from switch memory. The switch stores two versions of the
firmware. This command alternately activates the two versions.
Authority
Admin
Syntax
fallback
Notes
The Show Switch command displays the available firmware versions and the currently active version.
After running the Fallback command, reset the switch for the firmware to be in effect.
Examples
The following is an example of the Fallback command.
FCSM: user1> admin start
FCSM (admin) : user1> fallback
Reverting to previous software image. Please confirm (y/n): [n] y
FCSM: user1> admin end
FCSM: user1>