Filter
Top Products
145
5 Symptom-to-FRU index
This index supports the Fibre Channel Switch Module and Fibre Channel Expansion Card.
Notes:
1. Check the configuration before you replace a FRU. Configuration problems can cause false errors and
symptoms.
2. For devices not supported by this index, refer to the manual for that device.
3. Blade switch modules and management modules must be replaced during service within two minute.
The symptom-to-FRU index lists symptoms, errors, and the possible causes. The most likely cause is listed
first. Use this symptom-to-FRU index to help you decide which FRUs to have available when servicing the
computer.
The left-hand column of the tables in this index lists error codes or messages, and the right-hand column lists
one or more suggested actions or FRUs to replace.
✏ NOTE
In tables with more than two columns, multiple columns are required to describe the error symptoms.
Take the action (or replace the FRU) suggested first in the list of the right-hand column, then try the server
again to see if the problem has been corrected before taking further action.
✏ NOTE
Try reseating a suspected component or reconnecting a cable before replacing the component.