Garmin GPSMAP 296 Satellite Radio User Manual


 
Aircraft Information
The Aircraft tab is divided into two sub tabs: Aircraft Profile and
Weight & Balance.
To open the Aircraft tab of the Main Menu:
1. Press MENU twice to open the Main Menu.
2. Highlight Aircraft from the vertical list of tabs.
3. Press the ROCKER right or left to highlight either the
Aircraft Profile tab or the Weight & Balance tab from the
top of the screen.
Aircraft Profile Tab
Entering Your Aircraft Profile
The Aircraft Profile tab allows you to profile cruising speed,
maximum speed, fuel flow, and map symbol. The unit can save up to
10 aircraft profiles.
Cruising speed and fuel flow are used as default settings when
viewing trip planning information on the Route Review Page. The
maximum speed is used to define the range for airspeed on the Panel
Page and is automatically updated if you exceed this figure.
To enter an aircraft profile:
1. From the Aircraft Profile tab, use the ROCKER to highlight
the on-screen New button, and press ENTER.
2. Highlight the Current Aircraft field, and press ENTER. Or,
highlight the Rename button, and press ENTER.
3. Use the ROCKER to ENTER the aircraft tail number (or other
identifying information) in the Current Aircraft field. Press
ENTER when finished.
4. Use the ROCKER to enter information for the cruising and
maximum speeds for your aircraft, your aircraft’s fuel flow,
and the symbol for your aircraft.
Select a symbol for your aircraft to change the data fields on
the Panel Page and the map symbol.
To select a saved aircraft profile:
1. From the Aircraft Profile tab, use the ROCKER to highlight
the Current Aircraft field, and press ENTER.
2. Use the ROCKER to select the aircraft profile, and press
ENTER.
46 GPSMAP 296 Pilot’s Guide
AVIATION MODE PAGES > AIRCRAFT INFORMATION