Filter
Top Products
Noise Reject—helps filter unwanted noise from the Sonar Page.
The Noise Reject can be turned Off, set to Normal (automatically
adjusts for optimum viewing) or to a fixed 1–100% setting. When
setting the Noise Reject, remember that a higher noise rejection
setting is less likely to show fish or structures.
Resizing the Split Screen
You can adjust the way the split screen is shown. This option is only
available when a zoom scale other than No Zoom is selected.
To resize the Sonar Page split screen:
1. From the Sonar Page split screen, press MENU.
2. Using the ROCKER, highlight Size Split, and press ENTER.
3. Move the horizontal double-arrow left or right using the
ROCKER until the vertical width line shows, then press
ENTER.
4. If you want to cancel this operation, press QUIT or press
MENU, highlight Stop Resizing, and press ENTER.
Using the Pointer on the Sonar Page
You can show the pointer (arrow) to reference sonar items and
mark underwater waypoints. This makes it easier to find and use an
object such as a stump for a future fishing location. When using this
feature, the Sonar Page pauses. The depth continues to update while
the screen pauses, but the unit does not show any new sonar data
until the Sonar Page resumes scrolling.
To
mark an underwater waypoint:
1. From the Sonar Page, press MENU, highlight Show Pointer,
and press ENTER.
2. Use the ROCKER to move the pointer to the location you
want to mark. Press ENTER. The New Map Waypoint Page
appears.
3. To change the name, symbol, or depth, highlight the
appropriate field and press ENTER. Make your changes, and
press ENTER when finished.
4. When done, highlight OK, and press ENTER.
5. To return to the standard Sonar Page, press QUIT; or press
MENU, highlight Hide Pointer, and press ENTER.
124 GPSMAP 296 Pilot’s Guide
SETTING UP AND USING SONAR > USING THE SONAR PAGE