Sony DHC-ZX50MD Stereo System User Manual


 
94
Self-diagnosis Display
This system has the Self-diagnosis display
function to let you know if there is a system
malfunction. The display shows a code made up of
three letters and a message alternately to show you
the problem. To solve the problem refer to the
following list. If any problem persists, consult
your nearest Sony dealer.
C11 / Protected
The MD is protected against erasure.
pRemove the MD and slide the tab to close the
slot (page 37).
C12 / Cannot Copy
You are attempting to record a CD with a
format that the system does not support, such as
CD-ROM.
p ––
C13 / REC Error
Recording is not possible.
pMove the system to a stable place and start
recording over from the beginning.
The MD is dirty or is scratched or the MD does
not meet the standards.
pChange the MD with another one and start
recording over from the beginning.
C13 / Read Error
The MD cannot read the disc information
correctly.
pEject the MD once, then insert it again.
C14 / Toc Error
The MD cannot read the disc information
correctly.
pChange the MD with another one.
pErase all the recorded contents of the MD
using the Erase function on page 52.
C41 / Cannot Copy
This unit complies with the Serial Copy
Management System (SCMS) which limits the
number of digital copies that can be made of
any given digital audio source (page 90).
C71 / Check OPT-IN
You tried to record from the digital component
when no component is connected to OPTICAL
IN jack or the digital component is not
connected correctly.
pConnect the digital component correctly to
OPTICAL IN jack with a digital optical cable.
The power of the connected digital component
is off.
pTurn on the digital component.
E0001 / MEMORY NG
The component has internal problems.
pConsult your nearest Sony dealer.
E0101 / LASER NG
There is a problem with the laser pickup.
pThe laser pickup may be damaged. Consult
your nearest Sony dealer.