Filter
Top Products
8
3 Move the multi stick toward v or V
repeatedly to set the hour.
4 Move the multi stick toward B.
The minute indication flashes.
5 Move the multi stick toward v or V
repeatedly to set the minute.
6 Press PUSH ENTER.
To cancel the menu operation
Press MODE SELECT.
Tips
• Refer to the illustration to use the multi stick. Place
your finger on the center of the multi stick and
move in the direction you want (up/down or left/
right shown v/V or b/B in this manual).
PUSH
ENTER
• If you’ve made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to set
the time while the power is off. To change the
time while the power is on, do the following:
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “Timer Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “Clock Set ?”, then press PUSH
ENTER.
4 Perform steps 3 through 6 on the left.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Up (v)
Right (B)Left (b)
Down (V)
Step 2: Setting the time
(continued)