Filter
Top Products
50
To check the titles
To check the disc titles, press SCROLL on the
remote while playback is stopped. To check the
track titles, press SCROLL while playing. The
titles scroll across the display. To stop scrolling,
press SCROLL. Press the button again to resume
scrolling.
To erase titles
1 Press FUNCTION repeatedly until “MD”
appears in the display.
2 While MD is stopped, press MODE SELECT
repeatedly to select “Set Up Mode”, then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select “MD Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “MD Edit ?”, then press PUSH
ENTER.
5 Move the multi stick toward b or B repeatedly
to select “MD Name?”, then press PUSH
ENTER.
6 Move the multi stick toward b or B repeatedly
to select “Name Erase?”, then press PUSH
ENTER.
7 Move the multi stick toward b or B repeatedly
until the disc or track you want to erase the title
appears, then press PUSH ENTER.
“Complete!” appears.
To erase all the titles in a disc
1 Press FUNCTION repeatedly until “MD”
appears in the display.
2 While MD is stopped, press MODE SELECT
repeatedly to select “Set Up Mode”, then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select “MD Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “MD Edit ?”, then press PUSH
ENTER.
5 Move the multi stick toward b or B repeatedly
to select “MD Name?”, then press PUSH
ENTER.
6 Move the multi stick toward b or B repeatedly
to select “Name All Ers?”, then press PUSH
ENTER.
“Name All Ers ??” appears.
7 Press PUSH ENTER again. All the titles in the
disc are cleared.
To undo the Name Function
Use the Undo Function immediately after you
erased the track (see page 59).
Labelling titles during
recording
—
CD-MD Synchro Recording
If “CD-TEXT” lights up or flashes during
recording, you can record the CD TEXT
information onto the MD as follows:
• Automatically during recording
If you record on an unrecorded or completely
erased (see page 51) MD when “CD-TEXT” is
lit, the CD TEXT information (except for the
disc title) is automatically recorded.
• Manually during recording
When “CD-TEXT” flashes, press NAME
EDIT/ CHARACTER, then press PUSH
ENTER to record the title of the current track.
Note
Depending on the disc, the CD TEXT information
may not be recorded automatically.
Labelling an MD (continued)