Filter
Top Products
74
Creating a personal
audio effect file
— Personal file
You can create a personal file of audio patterns
(surround effect and graphic equalizer) and store
them in the memory of the unit. The personal files
can later be used when you listen to a favorite
tape, CD, or radio program. You can create up to
five audio files.
Before operation, first select the audio effect you
want for your basic sound.
Multi stick
PUSH ENTER
2
1 Obtain the sound effect you want by
controling the graphic equalizer (see
page 73) and selection surround effect
(see page 72).
2 Press MODE SELECT repeatedly to
select “Sound Mode”, then press PUSH
ENTER.
3 Move the multi stick toward b or B
repeatedly to select “P File Memory”,
then press PUSH ENTER.
The personal file number appears in the
display.
4 Move the multi stick toward b or B
repeatedly to select the file number
(P FILE 1~5) where you want to store
the sound effect.
5 Press PUSH ENTER.
The adjusted sound effects are stored under
the selected file number. The previously
stored settings at this memory location are
erased and replaced by the new settings.
To cancel the menu operation
Press MODE SELECT.
To call up the personal file
Press FILE SELECT on the remote repeatedly
until the file number you want (“P FILE 1 (~5)”)
appears.
Tip
The sound effect you stored are retained for half a day
even if you unplug the power cord or if a power
failure occurs.
?/1
(Power)