Filter
Top Products
Basic Operations
17
VOLUME
x
. >
m M
A
?/1
(Power)
Playing an MD
— Normal Play
1 Insert a recorded MD.
Insert the MD until the deck pulls it in.
When the disc presence indicator is lit in the
display, another MD has been inserted
already. Press A to eject the MD and then
insert a recorded MD if necessary.
1
With the arrow
pointing toward the
deck.
With the label side
up and the shutter
slide rightward.
Disc presence indicator
2
2 Press MD NX (or MD N on the
remote).
Playback starts.
To
Stop play
Pause
Select a track
Find a point in
a track
Remove a MD
Adjust the
volume
Tips
• You can start playing from the desired track in step
2.
1 Press ./> repeatedly until the desired
track number appears in the display.
2 Press MD NX.
• Pressing MD NX when the power is off
automatically turns the power on and starts MD
playback if there is an MD in the deck (One Touch
Play). When the system is in the Power Saving
Mode, the One Touch Play function does not work.
• You can switch from another source to the MD
deck and start playing an MD just by pressing
MD NX (Automatic Source Selection).
• If there is no MD in the deck, “No Disc” appears in
the display.
Note
Please do not use MDs with labels that are protruding
or labels that have not been positioned correctly. Use
of such MDs may damage this unit.
Playing time
Track number
Do this
Press x.
Press MD NX (or X on the
remote). Press again to resume
play.
During play or pause, press > (to
go forward) or . (to go back).
Press and hold down M or m
during play and release it at the
desired point.
Press A.
Turn VOLUME (or press VOL +/–
on the remote).