Filter
Top Products
29
Listening to a CD
To cancel the menu operation
Press MODE SELECT.
To cancel Program Play
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 While in stop mode, press MODE SELECT
repeatedly to select “Set Up Mode”, then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select “CD Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “Play Mode Set Up ?”, then press
PUSH ENTER.
5 Move the multi stick toward b or B repeatedly
to select “All Discs” or “1 Disc”, then press
PUSH ENTER.
The tracks continue playing in their original order.
To add tracks to the existing
program
Follow steps 1 through 8 when playback is
stopped. Add the desired track after the last
programmed step.
To check the program
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 While in stop mode, press MODE SELECT
repeatedly to select “Set Up Mode” then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select “CD Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “PGM Check Clear ?”, then press
PUSH ENTER.
5 Move the multi stick toward b or B.
The disc numbers and the track numbers appear
in the order they were programmed.
6 After checking the program, press MODE
SELECT.
To clear a desired step from the
program
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 While in stop mode, press MODE SELECT
repeatedly to select “Set Up Mode” then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select “CD Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “PGM Check Clear ?”, then press
PUSH ENTER.
5 Move the multi stick toward b or B.
The disc numbers and the track numbers appear
in the order they were programmed.
6 When you want to clear the displayed track,
press PUSH ENTER.
“Clear ?” appears in the display.
7 Press PUSH ENTER again.
The track displayed in step 5 is cleared from the
program.
To clear the entire program
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 While in stop mode, press MODE SELECT
repeatedly to select “Set Up Mode” then press
PUSH ENTER.
3 Move the multi stick toward b or B repeatedly
to select “CD Set Up ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “PGM Check Clear ?”, then press
PUSH ENTER.
5 Move the multi stick toward b or B repeatedly
to select “PGM All Clear”, then press PUSH
ENTER.
“PGM All Clear ?” appears.
6 Press PUSH ENTER.
continued