Filter
Top Products
82
8 Set the time to stop recording following
step 7.
9 When recording on an MD, move the
multi stick toward b or B repeatedly to
select the recording mode you want,
then press PUSH ENTER.
Each time you press the button, the display
changes as follows;
t STEREO t LP2
MONO (Monaural) T LP4 T
10 When the original display appears
after the details you set appear, turn off
the power.
When the recording starts, the volume level
is set to the minimum.
To cancel the menu operation
Press MODE SELECT.
To check the setting
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “Timer Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “Timer Select ?”, then press PUSH
ENTER.
4 Move the multi stick toward b or B repeatedly
to select “MD REC” or “TAPE REC”, then
press PUSH ENTER.
To change the setting, start over from step 1 on
page 81.
4 Move the multi stick toward b or B
repeatedly to select “Timer Set Up ?”,
then press PUSH ENTER.
5 Move the multi stick toward b or B
repeatedly to select either “Timer
Set ?”, then press PUSH ENTER.
“Set Daily 1” appears.
6 Move the multi stick toward b or B
repeatedly to select “MD REC” (MD
recording) or “TAPE REC” (Tape
recording), then press PUSH ENTER.
“On” appears and the hour digits flash in the
display.
MD REC or TAPE REC appears
MD REC
MD REC
7 Set the time to start recording.
Move the multi stick toward v or V
repeatedly to set the hour, then press PUSH
ENTER.
The minute digits flash in the display.
Move the multi stick toward v or V
repeatedly to set the minute, then press
PUSH ENTER.
Timer-recording radio programs
(continued)