Filter
Top Products
84
Optional components
Connecting a digital
component
(U.S.A. model only)
You can connect a digital component using a
digital cable (optical, optional).
You can record from the connected component on
an MD digitally.
Refer to the instructions of each component.
To the digital output jack of a digital
component
, Connect a digital cable (optical,
optional).
3Connect to the digital output jack of the digital
component.
• When you record on a tape, analog recording is
performed.
Tip
To listen to or to record from the connected digital
component, press FUNCTION repeatedly until “OPT
IN” appears in the display.
1Remove the
cover of the jack.
2Connect the
optical cable.
OPTICAL IN
1
OPTICAL IN
2
3