Filter
Top Products
24
To stop recording
Press x.
To cancel the menu operation
Press MODE SELECT.
Tips
• If you want to record from the reverse side, press
TAPE B n to light its indicator after pressing
TAPE REC PAUSE/START in step 4.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use m and M in
step 3 to tune in the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, do the following
procedure after pressing TAPE REC PAUSE/
START in step 4.
1 Press MODE SELECT repeatedly to select “Set
Up Mode”, then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select “TAPE Set Up ?”, then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select “DOLBY NR Set Up ?”, then press
PUSH ENTER.
4 Move the multi stick toward b or B repeatedly
to select “On”, then press PUSH ENTER.
“DOLBY NR” appears in the display.
To return to the original setting, repeat steps 1
through 4 and select “Off” in step 4.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Recording from the radio on a
tape (continued)