Filter
Top Products
63
Editing an MD
9 Press PUSH ENTER.
“S.F Edit OK?” appears in the display.
10 Press PUSH ENTER.
The deck starts recording over the existing
track. “S.F Edit: **%” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When recording
finishes, “Complete !” appears in the display
for a few seconds.
To cancel the operation
Press MODE SELECT during step 1 through 9.
After recording starts in step 10, you cannot
interrupt the operation.
To cancel the menu operation
Press MODE SELECT.
Notes
• You cannot change the recording level of a track
recorded in LP2 or LP4 mode.
• Do not disconnect the power cord or move the
system while recording is in progress. This may
damage the recording data, preventing recording
from being performed properly.
• You cannot return to the original condition after
Fade-in and Fade-out operations.