Filter
Top Products
Chapter 2: ZonePlayer Setup and Operation
2-15
attached to your home theater. Select Line-Out Level, and choose Fixed.
To control the volume from Sonos system
1. Adjust your home theater or other audio device's volume to typical listening
volume.
2. Set the line-out level on this ZonePlayer to Variable by selecting one of the
following options:
• Using the Desktop Controller software, select Set Up Zones from the Zones
menu. Select the ZonePlayer attached to your home theater, and then click Set-
tings. Click the Line-Out tab, and choose Variable.
• Using the Sonos Controller, from the Music menu, select System Settings. Se-
lect ZonePlayer Settings, and use the scroll wheel to highlight the ZonePlayer
attached to your home theater. Select Line-Out Level, and choose Variable.
3. Use the Controller to adjust the volume on your Sonos system so you can hear
music. This may be at the high end of the volume scale.
4. If desired, you can readjust the volume on your home theater system so that the
volume range for the Controller falls within your typical listening range.
To connect to a computer or powered speakers
• If you are connecting to your computer: You will need a stereo mini-to-RCA Y
adapter audio cable (one 1/8-inch stereo mini-plug to dual RCA male connec-
tors) to connect the ZonePlayer’s analog audio output to the computer’s audio
input.
• If you are connecting to powered speakers: You may need a Y adapter audio
cable (one 1/8-inch stereo mini-plug to dual RCA male connectors) to connect
the computer’s speakers to the audio outputs on the ZonePlayer. If your speak-
ers have a male 1/8-inch stereo plug, you can attach a female-to-female coupler
between the speaker plug and the Y adapter audio cable, or you can use a Y-
adapter audio cable (one 1/8-inch Female connector to dual RCA male connec-
tors).
Note: When you change the line-out level to Fixed on your ZonePlayer, you will not
be able to adjust the volume or the equalization settings using your Sonos
Controller.