Filter
Top Products
3. Use [ ][ ] to select "System Initialize" and
press [Enter].
• A dialog box to confirm the start of system
initialization is displayed.
4. Use [ ][ ] to select "Yes" and press [Enter].
• The system will automatically restart to
complete the system initialization.
Note
• After initialization, all system settings
previously made and information stored in
the contact list and call history are cleared.
Making Local Site
Settings
You can register up to 5 temporary local sites. One
KX-VC500 can be used in multiple meeting rooms
without the need to change certain basic network
settings.
Registering a Local Site
1. Press [Menu].
• The Menu screen is displayed.
2. Use [ ][ ] to select "Select local site" and
press [Enter].
• The select local site screen is displayed.
3. Use [
][ ] to select "Not
Registered" and press
[B].
• The local site settings screen is displayed.
4. Use [ ][ ] to select the following items for input:
"Local
site name": Enter a name for the local site.
"IP Address": Enter an IP address.
• If the IP address contains 1 or 2 digit numbers,
enter these numbers as they are. Do not enter
like [.001].
Example: The IP address is [192.168.0.1].
– Correct entry: [192.168.0.1]
– Wrong entry: [192.168.000.001]
"Subnet mask": Enter the subnet mask.
"Default Gateway": Enter the IP address of the
default gateway.
76 Operating Manual Document Version 2010-10
Contacts and Settings