Filter
Top Products
Note
• Pressing [Full Screen
] on the remote control will
hide or unhide the other party’s information,
duration, and guide displays.
• While displaying your computer’s screen, the
other party cannot press [PC] to display their
own computer’s screen.
• If a sub video camera is connected, you can also
switch to the sub video camera image by
pressing [Camera Sub] (Page 52). Only the
party that pressed [PC] can perform this
operation. To return to displaying your
computer’s screen, press [PC].
• While displaying your computer’s screen, you
can switch to displaying the other party’s image
in Layout 1 by pressing [B] (Page 39, Page 40,
Page 42). However, the other party cannot
perform this operation, and the other party
cannot confirm if you are viewing your
computer’s screen or the other party’s image.
When viewing the other party’s image, the
screen layout is fixed to Layout 1. To return to
displaying your computer’s screen, press [B].
2 Press [Camera Main] to return to showing the main
video camera’s image.
Note
• Only the party that pressed the [PC] button can
perform this operation.
Note
• On the Home screen, you can also display the
computer’s screen
on your display by pressing [PC].
While the computer’s screen is displayed, the
KX-VC500 will not enter screen standby mode.
To return to the Home screen, press [Camera
Main].
Document Version 2010-10 Operating Manual 51
Displaying Other Video Sources