Filter
Top Products
Displaying Unit Information
1 Press [Status] twice.
• The unit information screen is displayed.
2
1
• The status of communication encryption is displayed
under
"Encryption" and the resolution for sending
images is displayed under "Resolution (send)".
This information is not displayed when
communication is not occurring.
• If [Status] is pressed twice during a video
conference call, you can press [R] to switch to the
next screen. That screen displays the IP address,
packet loss rate, connection bandwidth, resolution,
frame rate and field frequency for the 3 parties
displayed under "Site 1", "Site 2" and "Site 3".
2 Press [Back].
• The display returns to the screen in use before the
step 1 was performed.
Document Version 2010-10 Operating Manual 57
Displaying the Connection Status