Filter
Top Products
Making Remote Control
Settings
You can specify a remote control ID from 1, 2, or 3 for
both the remote control and the KX-VC500. The
KX-VC500
responds to signals from any remote control
with the same remote control ID as itself. If you do not
specify an ID, the KX-VC500 responds to signals from
all remote controls. You can confirm the remote control
ID for the KX-VC500 on the Home screen. (Page 25)
1. Press [Menu].
• The Menu screen is displayed.
2. Use [
][ ] to select "Settings" and press
[Enter].
• The system settings screen is displayed.
3. Press [
].
• The next page is displayed.
4. Use [ ][ ] to select "Remote
Ctrl ID" and press
[Enter].
• The remote control settings screen is displayed.
5. Use [ ][ ] to select the following items for input:
"Remote ID enable"
: Use [
][ ] to select
"ON" or "OFF" (default).
• When "ON" is selected, you can set a specific
remote control ID for the KX-VC500.
• When "OFF" is selected, the KX-VC500 will
respond to all remote controls.
"Remote control ID": Use [
][ ] to select a
remote control ID ("ID1" [default]/"ID2"/"ID3") for
the KX-VC500.
"Check ID mismatch": Use [ ][ ] to select
"ON" (default) or "OFF".
• When "ON" is selected, if the KX-VC500
receives a signal from a remote control that has
an ID different from the one specified on the
Home screen, a warning is displayed. Follow
the procedures on the screen to change the
remote control ID.
• When "OFF" is selected, even if the
KX-VC500 receives a signal from a remote
control that has an ID different from the one
specified, no warning is displayed on the Home
screen.
Note
• If multiple remote controls with assigned
IDs are being used close together, it is
recommended that you select "OFF" for
"Check ID mismatch".
6. Press [G].
• A dialog
box to confirm the saving of settings is
displayed.
7. Use [
][ ] to select "Yes" and press [Enter].
8. When "Remote ID enable" is set to
"ON" (Page 68):
The dialog box for changing the ID of the remote
control is displayed. Proceed to step 9.
Note
• While the dialog box is displayed, video
conference calls cannot be received.
When "Remote ID enable" is set to
"OFF" (Page 68):
The system settings screen is displayed. Press
[Home] to return to the Home screen.
68 Operating Manual Document Version 2010-10
Contacts and Settings