Filter
Top Products
57
OPERATIONS:
To use this remote control system, you need to connect the main
room TV to the MONITOR OUT jack (see page 12), and the sub-
room TV to the SUB ROOM MONITOR OUT jack (see page 17)
and set the TV’s input mode to the proper position to which the
receiver is connected.
Make sure you have connected the CD player or MD recorder
equipped with the TEXT COMPU LINK remote control system.
If not, you cannot use the following functions.
IMPORTANT:
Check to see if the following before/while using the buttons and
controls.
• When using the remote control:
–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector
to “MAIN ROOM” or “SUB ROOM” correctly.
–Check the indication shown on the remote’s display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either MAIN ROOM or
SUB ROOM) for a while (10 or 5 seconds).
Showing the Disc Information on the TV
Screen (Either in the Main Room or in the
Sub-Room)
Press TEXT DISPLAY while “CD” or “MD” is
selected as the source.
The Disc Information screen appears on the TV.
1 Source name: CD or MD
2 Select or , then press SET to change the disc.
3 Track numbers and track titles.
• When you move to a track number, you can change the
track information by pressing @ / #. Each time you press the
button, track information alternates between its track title and
its performer. (You can also start playing the track by pressing
SET.)
4 Select this (move
in front), then press SET to go to the
DISC SEARCH screen (see page 58).
5 Select this (move
in front), then press SET to go to the
TITLE INPUT screen (see page 59).
6 This appears only when a CD Text is selected.
7 Disc information such as the disc title, performer, music genre,
etc.
When this is selected (
in front), you can change the disc
information by pressing @ / #. Each time you press the button,
disc information (see “Note on 7”) changes.
8 Select
or , then press SET to change the track.
9 Usable buttons and their functions for the current selection.
Indication here will be changed according to what is currently
selected (
in front) on the screen. See “Note on 9.”
Note on
7
:
The following information will appear on the display:
• For CD Texts — Disc title, Performer, Genre, Song writer,
Composer, Arranger, Message
Only recorded information will be shown. If there is no data, “NO
DATA” will appear.
• For MDs — Disc title
If there is no data, “NO DATA” will appear.
Note on
9
:
For example, the SET button will be used to start play (PLAY), to go to
the next screen (ENTER), and to determine the selection (ENTER).
To exit from the Disc information screen:
Press EXIT.
Notes:
• The on-screen display will disappear in the following cases:
– if no operation is done for about 10 minutes.
– if you do any operation other than explained in this section.
• To control the MD recorder using the TEXT COMPU LINK remote
control system, you have to change the source name shown on the
display from “TAPE” to “MD.” (See page 25.)
• Some special characters and marks cannot be displayed correctly.
1
2
3
4
5
7
6
8
9
Disc Information screen
SUB ROOM
TRANSMITLEARN
MAIN ROOM
ON/OFF ON/OFF
SUB ROOM
TRANSMITLEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
MAIN ROOM
STANDBY
TV/CATV/DBS
STANDBY/ON STANDBY/ON
VCR 1
ON
ON/OFF ON/OFF
SUB ROOM
TRANSMITLEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
SUB ROOM
STANDBY
TV/CATV/DBS
STANDBY/ON STANDBY/ON
VCR 1
ON
Ex.When you press TEXT
DISPLAY with MAIN
ROOM/SUB ROOM
(LEARN/TRANSMIT)
selector set to “MAIN
ROOM.”
Ex.When you press TEXT
DISPLAY with MAIN
ROOM/SUB ROOM
(LEARN/TRANSMIT)
selector set to “SUB
ROOM.”
Text display operation buttons
SET
EXIT
TEXT
DISPLAY
SUB ROOM
TRANSMITLEARN
MAIN ROOM
EN54-60_RX-DP10VBK[J]_f 01.6.19, 11:39 AM57