Filter
Top Products
41
Sound Adjustments
When performing the sound adjustments, it is recommended to use the remote control so that you can show the
on-screen display menu on the TV.
• When using the buttons on the unit, you can perform the same settings referring to the indications shown on the
main unit’s display. (The following on-screen display menus cannot be shown if you use the buttons on the unit.)
• Sound adjustment operations are only possible while the receiver is ready for the main room operations.
Adjustment Menu Configuration
Note:
When performing sound adjustments viewing the indications on the
main unit’s display, the indications shown are slightly different from
what is shown on the on-screen display.
This is because of the limited number of characters shown on the
main unit’s display.
Ex. • “FRONT L LEVEL” is shown as “FRONT L LVL” on the main
unit’s display.
• “CENTER LEVEL” is shown as “CENTER LVL” on the main unit’s
display.
PARAMETRIC EQ
FRONT
CENTER
SURROUND
SURROUND BACK
:ENTER
:BACK
:ENTER
:EXIT
ADJUST MENU
LEVEL
PARAMETRIC EQ
DSP PARAMETER
CENTER CHANNEL
ADJUST MENU
1 LEVEL
(See page 37.)
3 DSP PARAMETER
(See page 38.)
PEQ FRONT (See page 38.)
PEQ CENTER (See page 38.)
PEQ SURROUND (See page 38.)
PEQ SURR(ound) BACK (See page 38.)
2 PARAMETRIC EQ
(See page 37.)
4 CENTER CHANNEL
(See page 38.)
:OPERATE :BACK
LEVEL
TEST TONE :OFF
FRONT L LEVEL: 0dB
CENTER LEVEL : 0dB
FRONT R LEVEL: 0dB
SURR R LEVEL : 0dB
SBACK R LEVEL: 0dB
SBACK L LEVEL: 0dB
SURR L LEVEL : 0dB
SUBWOOFER : 0dB
:OPERATE
:BACK
DSP PARAMETER
EFFECT LEVEL :3
ROOM SIZE :3
LIVENESS :3
WALL TYPE :3
SEAT POSITION:1
CENTER CHANNEL
CENTER EQ : OFF
CENTER ALINMENT: OFF
:OPERATE
:BACK
:OPERATE
:BACK
PEQ SURR BACK
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
:OPERATE
:BACK
PEQ FRONT
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
:OPERATE
:BACK
PEQ CENTER
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
:OPERATE
:BACK
PEQ SURROUND
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
NOTICE—
• If Line Direct is in use (see page 25), you cannot make any
sound adjustments using the Adjustment Menu.
• Items on the menus shown above are all set to the initial
values when shipped from the factory.
• Some of the menus or some items on the menu cannot be
shown or cannot be adjusted. (For details, see the respective
explanation in this section.)
EN41-45_RX-DP10VBK[J]_f 01.6.19, 11:36 AM41