JVC RX-DP10VBK Stereo System User Manual


 
33
Basic Settings
Some of the following settings are required after connecting and positioning your speakers, while others will make
operations easier.
When performing the basic settings, it is recommended to use the remote control so that you can show the on-
screen display menu on the TV.
When using the buttons on the unit, you can perform the same settings referring to the indications on the unit’s
display. (The following on-screen display menus cannot be shown if you use the buttons on the unit.)
Basic setting operations are only possible while the receiver is ready for the main room operations.
Setup Menu Configuration
Note:
When performing the basic settings viewing the indications on the
main unit’s display, the indications are slightly different from what is
shown on the on-screen display.
This is because of the limited number of characters shown on the
main unit’s display.
Ex. “SPEAKER SETTING” is shown as “SP SETTING” on the main
unit’s display.
“SPEAKER DISTANCE” is shown as “SP DISTANCE” on the
main unit’s display.
:ENTER
:EXIT
SETUP MENU 2 
PREVIOUS PAGE
DIGITAL IN
COMPONENT IN
VIDEO POWER
SUB ROOM
FL DISPLAY
ONE TOUCH OPERATION
SETUP MENU (1)
SETUP MENU (2)
7 DIGITAL IN
(See page 38.)
8 COMPONENT IN
(See page 39.)
DIGITAL IN
COAXIAL INPUT: 1DVD
OPTICAL INPUT:
2CD 3TV 4CDR 5MD
:OPERATE
:BACK
COMPONENT IN 
COMPONENT INPUT:
1DVD 2–––
:OPERATE
:BACK
9 VIDEO POWER
(See page 39.)
VIDEO POWER 
VIDEO POWER : ON
:OPERATE
:BACK
p SUB ROOM
(See page 40.)
SUB ROOM 
SUB PREOUT :VARIABLE
SPEAKER2 :MAIN
:OPERATE
:BACK
FL DISPLAY 
FL DISPLAY : TEXT
:OPERATE
:BACK
ONE TOUCH OPE 
ONE TOUCH OPE : OFF
:OPERATE
:BACK
q FL DISPLAY
(See page 40.)
w ONE TOUCH OPE(ration)
(See page 40.)
NOTICE—
Items on the menus shown above are all set to the initial
values when shipped from the factory.
Some of the menus or some items on the menu cannot be
shown or cannot be adjusted. (For details, see the
respective explanation in this section.)
:ENTER
:EXIT
SETUP MENU 1 
SPEAKER SETTING
SPEAKER DISTANCE
SUBWOOFER
DYNAMIC RANGE
THX
SURROUND SPEAKER
NEXT PAGE
:OPERATE :BACK
SPEAKER DISTANCE 
UNIT : meter
SUBWOOFER : 3.00m
FRONT L SP : 3.00m
FRONT R SP : 3.00m
CENTER SP : 3.00m
SURR L SP : 3.00m
SURR R SP : 3.00m
SBACK L SP : 3.00m
SBACK R SP : 3.00m
SUBWOOFER 
CROSSOVER : 80Hz
LFE LEVEL : 0dB
PHASE :NORMAL
BASS PEAK LIMIT: ON
BASS TEST TONE : OFF
BASS PEAK LVL: 0dB
:OPERATE
:BACK
DYNAMIC RANGE 
MIDNIGHT MODE : OFF
:OPERATE
:BACK
THX 
THX SURR EX : AUTO
:OPERATE
:BACK
SURROUND SPEAKER 
SURROUND SP:L/R
:OPERATE
:BACK
SETUP MENU (1)
SETUP MENU (2)
1 SPEAKER SETTING
(See page 36.)
3 SUBWOOFER
(See page 37.)
2 SPEAKER DISTANCE
(See page 36.)
4 DYNAMIC RANGE
(See page 38.)
5 THX
(See page 38.)
6 SURROUND SPEAKER
(See page 38.)
:OPERATE
:BACK
SPEAKER SETTING 
SUBWOOFER : NO
FRONT SP : LARGE
CENTER SP : SMALL
SURROUND SP : SMALL
SURR BACK SP : SMALL
EN33-40_RX-DP10VBK[J]_f 01.6.21, 5:41 PM33