Filter
Top Products
40
Memorizing the Volume Level for Each
Source—ONE TOUCH OPE(ration) (w)
This unit memorizes many
settings separately for each
source. (See page 26.)
In addition, you can store the
volume level for each source
together with the other
memorized settings.
7
Storing the volume level for each source
Select one of the following:
ON : Select this to store the volume level setting
separately for each source. (The ONE TOUCH
OPERATION indicator lights up on the main unit’s
display.)
This receiver memorizes the volume level—
• when you turn off the power,
• when you change the source,
• when you change the analog/digital input mode
(see page 23), and
• when you turn on One Touch Operation.
OFF : Select this not to store the volume level setting.
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume level
for the currently selected source is recalled when the source is
selected.
To cancel the One Touch Operation
Set One Touch Operation to “OFF” so that the ONE TOUCH
OPERATION indicator goes off.
Preparing for the Sub-Room Operations
—SUB ROOM (p)
On this submenu, you can
determine the output signal type
through the SUB ROOM
PREOUT jacks, and the usage of
the speaker connected to the
FRONT SPEAKER2/SUB
ROOM terminals.
7
Setting the signal output type through the SUB
ROOM PREOUT jacks
When connecting the sub-room front speakers to the SUB
ROOM PREOUT jacks through another amplifier (see page 17),
determine how to adjust the volume level in the sub-room.
Select one of the following:
VARIABLE : Select this when you want to adjust the sub-
room volume level using the MASTER
VOLUME control on this unit (or VOLUME +/
– on this remote control).
FIXED : Select this when you want to adjust the sub-
room volume level using the amplifier
connected to the SUB ROOM PREOUT jacks.
• The MASTER VOLUME control on this unit
(or VOLUME +/– on this remote control)
cannot adjust the sub-room volume level.
7
Setting the speakers 2
When connecting the speakers to the FRONT SPEAKERS 2/
SUB ROOM, determine the speaker usage—whether you use
these speakers as the second front speakers in the main room or
as the front speakers in the sub-room.
MAIN : Select this when you use these speakers as the
second front speakers in the main room.
SUB : Select this when you use these speakers as the front
speakers in the sub-room.
Showing the Text Information on the
Display—FL DISPLAY (q)
When you have connected an
MD recorder or CD player
equipped with TEXT COMPU
LINK remote control system
(see page 56), you can show the
text information, such as disc
title or track title, on the display
of this receiver.
7
Turning on or off the text information display
Select one of the following:
NORMAL : Source name and Surround/DSP mode appear
during play.
TEXT : Text information appears during play.
Note:
Though you have selected “TEXT,” the source name and Surround/
DSP mode will appear while playing a disc that has no text
information.
FL DISPLAY
FL DISPLAY : TEXT
:OPERATE
:BACK
ONE TOUCH OPE
ONE TOUCH OPE : OFF
:OPERATE
:BACK
SUB ROOM
SUB PREOUT :VARIABLE
SPEAKER2 :MAIN
:OPERATE
:BACK
EN33-40_RX-DP10VBK[J]_f 01.6.19, 11:35 AM40