Filter
Top Products
42
The buttons that can be used on the menus are shown on the
screen.
You can perform menu operation with these usable buttons.
IMPORTANT:
Check to see if the following before or while using the buttons and
controls.
For the main room operations:
The MAIN ROOM ON/OFF lamp on the unit is lit.
• When using the unit:
–“SUB ROOM” is not shown in the main display.
–Press DOOR DOWN to use the buttons inside the
front door.
To close the front door, press DOOR UP.
• When using the remote control:
–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector
to “MAIN ROOM.”
–Check the indication shown on the remote’s display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either MAIN ROOM or
SUB ROOM) for a while (10 or 5 seconds).
Button
ADJUST MENU
SET
EXIT
fi / %
@ / #
SET
ADJUST
MENU
EXIT
Operation through On-Screen Display
Menus
To make sound adjustments for this receiver, use the remote control
so that you can utilize the on-screen display menus in order to finish
important adjustments easily while viewing these menus.
Menu operation buttons
From the remote control:
• When no operation is done for about 1 minute, the on-screen menu
(as well as the indications in the unit’s main display) will
disappear.
Button
ADJUST MENU
ADJUST MENU DOWN
LEFT
UP
RIGHT
SET
EXIT
DOWN/UP
SET
LEFT/RIGHT
EXIT
(inside the front door)
On the front panel:
• When no operation is done for about 5 seconds, the indications on
the unit’s display will disappear.
DOOR
DOWN
ON/OFF ON/OFF
SUB ROOM
TRANSMITLEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
MAIN ROOM
STANDBY
TV/CATV/DBS
STANDBY/ON STANDBY/ON
VCR 1
ON
SUB ROOM
TRANSMITLEARN
MAIN ROOM
Ex.When you press ADJUST MENU with
MAIN ROOM/SUB ROOM (LEARN/TRANSMIT)
selector set to “MAIN ROOM.”
To do
display or erase the Adjustment Menu.
select a submenu item on the Adjustment
Menu or on submenus (downwards or
upwards).
move to the selected submenu screen.
select the desired setting on a submenu.
exit from menu operations or return to the
previous menu.
To do
display or erase the Adjustment Menu.
select a submenu item on the Adjustment
Menu or on submenus (downwards or
upwards).
move to the selected submenu screen.
select the desired setting on a submenu.
exit from menu operations or return to the
previous menu.
Usable buttons
Usable buttons
:OPERATE :BACK
LEVEL
TEST TONE :OFF
FRONT L LEVEL: 0dB
CENTER LEVEL : 0dB
FRONT R LEVEL: 0dB
SURR R LEVEL : 0dB
SBACK R LEVEL: 0dB
SBACK L LEVEL: 0dB
SURR L LEVEL : 0dB
SUBWOOFER : 0dB
:ENTER
:EXIT
ADJUST MENU
LEVEL
PARAMETRIC EQ
DSP PARAMETER
CENTER CHANNEL
EN41-45_RX-DP10VBK[J]_f 01.6.21, 6:17 PM42