Filter
Top Products
31
Indicates the functions YOU CAN ALSO USE when
the receiver is ready for the sub-room operations.
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
Tuning into Stations Manually
On the unit:
1. Press FM or AM.
The last received station is tuned in.
2. Press UP or DOWN (inside
the front door) until you find
the frequency you want.
• Pressing UP increases the
frequencies.
• Pressing DOWN decreases the frequencies.
From the remote control:
1. Press FM or AM.
The last received station is tuned in.
2. Press TUNING UP or TUNING
DOWN until you find the frequency you want.
• Pressing TUNING UP increases the frequencies.
• Pressing TUNING DOWN decreases the frequencies.
Notes:
• When a station of sufficient signal strength is tuned in, the
TUNED indicator lights up on the display.
• When an FM stereo program is received, the STEREO
indicator also lights up.
• When you hold the button (and release it) in step 2, the
frequency keeps changing until a station is tuned in.
• You can only select the same station of the same band (FM or
AM) both for the main room and sub-room operations. If you
change the station for the sub-room, it also changes for the
main room (and vice versa: indications in the main display also
change). This also means that if you change the station for the
sub-room while recording a broadcasting program in the main
room, recording in the main room will be interrupted.
L
ANALOG
SPEAKERS
VOLUME
1
SUBWFR
R
dB
SPEAKERS
VOLUME
SUB ROOM
1
dB
When operating for the main room
When operating for the sub-room
FM AM
DOWN UP
IMPORTANT:
Check to see if the following before or while using the buttons and
controls.
For the main room operations:
The MAIN ROOM ON/OFF lamp on the unit is lit .
For the sub-room operations:
The SUB ROOM ON/OFF lamp on the unit is lit.
• When using the unit:
–For the main room operations: “SUB ROOM” is not shown in the
main display.
–For the sub-room operations: “SUB ROOM” is shown in the main
display.
–Press DOOR DOWN to use the buttons inside the
front door.
To close the front door, press DOOR UP.
• When using the remote control:
When operating the receiver using the remote control, the
display on the unit always shows the main room source
information though you are operating it for the sub-room
source.
–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector
to “MAIN ROOM” or “SUB ROOM” correctly.
–Check the indication shown on the remote’s display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either MAIN ROOM or
SUB ROOM) for a while (10 or 5 seconds).
SUB ROOM
TRANSMITLEARN
MAIN ROOM
AM
FM
TUNING
FF/
/ REW
PLAY
DOWN UP
SUB ROOM
TRANSMITLEARN
MAIN ROOM
DOOR
DOWN
ON/OFF ON/OFF
SUB ROOM
TRANSMITLEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
MAIN ROOM
STANDBY/ON STANDBY/ON
STANDBY
TV/CATV/DBS
VCR 1
ON
ON/OFF ON/OFF
SUB ROOM
TRANSMITLEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
SUB ROOM
STANDBY/ON STANDBY/ON
STANDBY
TV/CATV/DBS
VCR 1
ON
Ex.When you press FM
with MAIN ROOM/SUB
ROOM (LEARN/
TRANSMIT) selector
set to “MAIN ROOM.”
Ex.When you press FM
with MAIN ROOM/SUB
ROOM (LEARN/
TRANSMIT) selector
set to “SUB ROOM.”
EN31-32_RX-DP10VBK[J]_f 01.6.19, 1:27 PM31