Filter
Top Products
51
ALL Channel Stereo mode (ALL CH STEREO)
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers. This mode cannot be used
without connecting the surround speakers.
• The CENTER CHANNEL submenu settings and the DSP
PARAMETER submenu settings cannot be applied to All Channel
Stereo mode. (You cannot adjust them for this mode.)
• If headphones are connected or if the front speakers are
deactivated, “ALL CH STEREO” cannot be selected. (See
“HEADPHONE Mode” below.)
Stereo Film and Monaural Film modes
In order to reproduce a more acoustic sound field in your listening
room while viewing stereo sound or monaural sound video software
(analog and 2-channel digital signals), you can use these modes.
The surround effect will be added, and the sound localization of
actor’s words will be improved.
STEREO FILM : To play back stereo video software
MONO FILM : To play back monaural video software
When “STEREO FILM” or “MONO FILM” is used, sounds come
out of all the connected (and activated) speakers.
3D THEATER
Only using the front speaker, this mode gives you such a true and
clear surround effect as is reproduced through the Dolby Surround
decoder, which is widely used to reproduce sounds with a feeling of
movement like those experienced in movie theaters.
• When “3D THEATER” is used, the DSP and 3D-PHONIC
indicators light up. The PRO LOGIC indicator also lights up when
2-channel software is played back. (Dolby Pro Logic decoder is
activated.)
• If the center speaker is connected (and activated):
Sounds created by the built-in DSP (Digital Signal Processor)
come out of the center speaker to localize the sounds. So, you can
feel as if actors on the screen actually speak in your room.
• If headphones are connected, “3D HEADPHONE” will be
activated. (See “3D HEADPHONE Mode” on page 47.)
Activating the DSP Modes
Perform the basic settings and adjustments using the Setup and
Adjustment Menus first (see pages 33 to 45).
Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments done on the
above menus.
IMPORTANT:
Check to see if the following before or while using the buttons and
controls.
For the main room operations:
The MAIN ROOM ON/OFF lamp on the unit is lit.
• When using the unit:
–“SUB ROOM” is not shown in the main display.
–Press DOOR DOWN to use the buttons inside the
front door.
To close the front door, press DOOR UP.
• When using the remote control:
–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector
to “MAIN ROOM.”
–Check the indication shown on the remote’s display when you
press a button—this indicates the remote control operation mode
together with multi-room operation mode (either MAIN ROOM or
SUB ROOM) for a while (10 or 5 seconds).
Ex.When you press DSP MODE with
MAIN ROOM/SUB ROOM (LEARN/TRANSMIT)
selector set to “MAIN ROOM.”
Before you start, remember...
When the SUB ROOM speaker indicator is lit on the display, you
can select only the DAP modes (with the 3D-PHONIC decoder
activated.)
1. Select and play any sound source.
2. Press DSP MODE repeatedly until the DSP mode
you want appears on the display.
The DSP indicator also lights up on the display.
• Each time you press the button, the DSP modes change as
follows:
=
LARGE HALL 1
=
LARGE HALL 2
=
RECITAL HALL
=
OPERA HOUSE
=
CHURCH
=
LIVE CLUB
=
DANCE CLUB
=
PAVILION =
ALL CH STEREO
= LARGE THEATER
=
SMALL THEATER
=
STEREO FILM* =
MONO FILM*
=
3D THEATER
=
SURROUND OFF (DSP off) =
(Back to the beginning)
DOOR
DOWN
SUB ROOM
TRANSMITLEARN
MAIN ROOM
ON/OFF ON/OFF
SUB ROOM
TRANSMITLEARN
MAIN ROOM
SUB ROOM
MAIN ROOM
MAIN ROOM
STANDBY
TV/CATV/DBS
STANDBY/ON STANDBY/ON
VCR 1
ON
DSP
MODE
DSP MODE
On the unit
(inside the front door)
On the remote control
HEADPHONE Mode
You can also enjoy the DSP effect (except All Channel Stereo
mode) through the headphones.
By pressing DSP MODE when the headphones are connected,
HEADPHONE mode is activated without respect to the type of
software played back.
The DSP and HEADPHONE indicators also light up.
EN46-53_RX-DP10VBK[J]_f 2001.6.28, 7:26 PM51