Filter
Top Products
HTML Operation, cont’d
USP 507• HTML Operation
6-10
Firmware Upgrade page
The Firmware Upgrade page (figure 6-8) provides a way to replace the firmware
that is coded on the USP 507’s control board without needing to take the device out
of service.
Figure 6–8 — Firmware Upgrade page
N
The Firmware Upgrade page is only for replacing the firmware that controls all
the device operation. To insert your own HTML pages, see File Management
Page, later in this chapter.
Update the USP 507 firmware as follows:
1
. Visit the Extron Web site, www.extron.com, and download the latest firmware
file to your computer.
a
. On the Extron Web page, select the Downloads tab.
b. On the Download Center page, click the Firmware link on the left sidebar
menu.
c
. Click on the USP 507 name.
d. On the next screen, fill in the required information, then click the
Download product name_firmware version.exe button.
e
. On the File Download - Security Warning window, click Save.
f
. On the Save As window, browse to the folder where you want to save
the firmware file, and click Save. The firmware installation (.exe) file is
placed on your hard drive.
g
. Run the .exe file. This opens the Firmware Update program, creating a
product named folder within which is placed the firmware file (x.S19).
2
. Access the USP 507 internal Web pages.
3. Select the Configuration tab.
4. On the Configuration page, click the Firmware Upgrade link on the left
sidebar menu.
5
. Click Browse. A Choose File To Upload window opens.
6
. Navigate to the folder (created in step 1g) where the firmware upgrade file is
saved. Select the file.