Filter
Top Products
USP 507 • SIS Programmer’s Guide
4-5
Symbol definitions
]
= Carriage return with line feed
¦ or }
= Carriage return with no line feed
• = Space
E
or W = Escape key
X!
= Input selection, 1 to 7
X#
= Input video format:
1 = RGB (default)
2 = YUVp/HDTV
3 = RGBcvS
4 = YUVi
5 = S-video
6 = Composite video
7 = SDI
8 = HD-SDI
9 = DVI
10 = Auto detect
X$
= H/V start — 0 to 255
(default midpoint = 128)
X^
= Pixel phase — 0 to 31 (default = 16)
X&
= Total pixels — (±512 of the default value)
X* =
Active pixels — (±512 of the default value)
X(
= Active lines — (±512 of the default value)
X1)
= Off/disable/none (0) or on/enable/black (1)
X1!
= Input standard:
0 = No signal
1 = NTSC
2 = PAL
4 = SECAM
- = N/A (occurs when input is set to a high resolution signal format)
X1@
= Internal temperature (in degrees Celsius)
X1#
= Horizontal and vertical frequencies (format is three digit with single decimal
and leading zeros, such as, 075.3)
X1%
= Picture adjustment — 0 to 127 (default 64)
X1^
= H and V position (zero location is 2048, and limits are ± the output resolution)
X1&
= H and V size (0 to 200% of the output area, in single pixel increments)
X1*
= Zoom (100 to 500%)
Default for low resolution video = 111%
Default for high resolution video = 100%
X1(
= Pan — 0 to 200 (default = 100 center point)
X2)
= Test patterns:
0 = Off (default) 8 = Crop
1 = Color bars 9 = 1.33 Aspect ratio
2 = Crosshatch 10 = 1.78 Aspect ratio
3 = 4x4 Crosshatch 11 = 1.85 Aspect ratio
4 = Grayscale 12 = 2.35 Aspect ratio
5 = Ramp 13 = Safe area
6 = Alternating pixels 14 = Blue mode
7 = White field