Filter
Top Products
HTML Operation
USP 507 • HTML Operation
6-2
The USP 507 can be controlled and operated through its Ethernet port, connected
via a LAN or WAN, using a Web browser such as Microsoft
®
Internet Explorer
®
.
The browser displays the unit’s factory-installed Web pages, which provide an
alternative means of viewing and operating the device.
N
If the Ethernet connection to the USP 507 is unstable, try turning off the proxy
server in the Web browser. To do this in Microsoft Internet Explorer, click Tools
> Internet Options > Connections > LAN Settings, and clear the “Use a
proxy server...” check box. Click OK.
Accessing the Web Pages
Access the HTML pages as follows:
1
. Start the Web browser program.
2. Click in the browser’s Address field and enter your USP 507’s IP address.
N
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
4. If you want the browser to display a page other than the default page (such as
a custom page that you have uploaded), enter a slash (/) and the name of the
file to open.
N
The browser’s Address field should display the address in the following format:
xxx.xxx.xxx.xxx/{optional_file_name.html}
N
The following characters are invalid in file names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and space.
5
. Press the keyboard’s Enter key. The USP 507 checks to see if the unit is
password protected.
If the unit is not password protected, the System Status Web page is
displayed.
If the unit is password protected, the network password dialog box is
displayed (figure 6-1).
Figure 6–1 — Example of a network password dialog box
6
. In the Password field, enter the appropriate administrator or user password.
If desired, select the check box to have the system input your password the
next time you enter your USP 507’s IP address. Click OK.
N
A user name entry is not required.
Some Web pages may not be available or may be viewable only when logged in
as a user.