Filter
Top Products
USP 507 • SIS Programmer’s Guide
4-15
Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Image Capture/Recall
Image capture/recall to USP 507 flash memory
Save image
E 0*filenameMF} Ims*filename]
Saves currently displayed
image to memory under the
designated name.
Recall image to foreground
E 0*filenameRF} Imr0filename]
Recalls image to be displayed
in foreground.
Recall image to background
E 1*filenameRF} Imr1filename]
Recalls image to be displayed
in background.
Mute image
E 0*0RF} Imr0]
Mutes image on the output and
reveals live input video
Current image
E RF} X3*filename]
View currently displayed
image name.
N
The filename must be 16 characters or less, including the *.bmp extension.
Resets
Erase user-supplied Web
pages and files
E filenameEF} Del•filename]
Erase current directory and
files
E/EF} Ddl]
Erase current directory and
subdirectories
E//EF} Ddl]
Erase flash memory
E ZFFF} Zpf]
Reset all device settings to
factory default settings
E ZXXX} Zpx]
Absolute system reset
E ZQQQ} Zpq]
Includes resetting IP to
192.168.254.254 and subnet
mask to 255.255.000.000.
Absolute system reset (but
retain IP)
E ZY} Zpy]
N
This reset is similar to ZQQQ but excludes IP address, subnet mask, gateway addresses, unit name, DHCP setting, and
port mapping (telnet/web/direct access) in order to maintain communications with device. Recommended after a firmware
update.
Information request
General information I/i
Vid
X!
•Typ
X#
•Std
X1!
•Blk
X1)
•Hrt
X1#
•Vrt
X1#
•Pip
X!]
Query firmware version Q/q
x.xx
]
Query part number N/n
68-1055-xx
]
View part number.
View internal temperature
E 20STAT} STAT20•X1@]
Temperature in degrees
Celsius.
N
X!
= Input selection 1 – 7
X#
= Input video format 1 = RGB (default), 2 = YUVp/HDTV, 3 = RGBcvS, 4 = YUVi, 5 = S-video,
6 = composite video, 7 = SDI, 8 = HD-SDI, 9 = DVI, 10 = auto detect
X1)
= Off/Disable/none (0), on/enable/black (1)
X1!
= Input standard 0 = No signal, 1 = NTSC, 2 = PAL, 4 = SECAM,
- = N/A (occurs when input is set to a high resolution signal format)
X1@
= Internal temperature Degrees Celsius
X1#
= Horizontal/vertical frequencies, format is three digits (e.g., 075.3)
X3*
= Recalled image location 0 = foreground, 1 = background