Extron electronic USP 507 Stereo System User Manual


 
USP 507 • USP 507 Software
5-9
Unit Info... — Select this to open a dialog box with
information about the connected device. The box
shows the part number, the name, model description,
currently installed firmware version and build, and
the device’s internal temperature.
Control tab
The Control tab displays the current configuration of the
USP 507, with numbered boxes representing the video
inputs. Also visible on the Control tab are: PIP control buttons, current picture
adjustment values, input, user, and PIP presets, Video Mute, Freeze and Auto
Image buttons. The output view thumbnail in the upper left of this screen shows
the main window details and, when PIP is active, the PIP location and details.
Figure 5-3 — The Control tab screen
Inputs — The current active input is shown (yellow). Select a desired input
button to change to that input.
PIP Control — If the PIP feature is active (on) the PIP input is shown in green. To
swap a selected PIP input for the main input, click Swap. To change to a different
PIP input, click on that PIP input button. To turn the PIP feature off, click Off.
Video Mute— Select this to mute or unmute the main video image. When
selected, the button text turns red.
Freeze — Select this to freeze an image. When selected, the button text turns red.
Auto Image — Select this to perform an auto image on an input.
Picture Adjustments — The Picture Adjustments section at the bottom of the
Control tab has three tables: Image, Input Settings, and Zoom/Pan. Each table’s
value field can be adjusted as desired. Refer to the SPPCP Help File for details.
When PIP is active all picture adjustments only affect the PIP image.
Input Presets — The specific settings for size, centering, contrast, brightness,
detail, zoom, and input configuration of an input can be saved to a preset. Up to
128 input presets can be saved. A saved preset can be recalled as desired.
Select a preset number and click Save or Recall as applicable.
N
Saving to an existing preset overwrites the prior saved data in favor of the new.