Filter
Top Products
3-9
USP 507 • Front Panel Operation
Image capture/recall
Within this menu, the currently displayed image can be captured and saved to the
USP 507 memory. This image or any other saved image can then be recalled and
output to the active display at a later time. The recalled image can be displayed at
the front of or behind an active video signal.
To capture an image:
1. Press Next to enter the save menu, the LCD displays “Save Image: <N/A>”.
Use either Adjust knob to scroll through 16 image names, (IMG01.bmp
through IMG16.bmp) to select a suitable name.
N
When saving an image to a selected name, any image previously saved with that
selected name is overwritten in favor of the newly saved image.
2. When the desired image name is reached, press Next. The LCD displays
“[Detail] to Confirm”, and the Detail button flashes red.
3. Press the detail button, the LCD changes to “Saving Image Please wait”. The
display then changes to “Saving Image” and a progress bar begins showing
the progress of the image capture process. When the image is saved the LCD
reverts to the default menu cycle.
N
Custom image names can be used when image captures are initiated using the
appropriate SIS commands.
ZOOM/
PAN
DETAIL
[Detail] = Confirm
IMG05.BMP
Step 1
LCD screen displays
ADJUST
Rotate either
adjust knob.
Save Image:
<N/A>
MENU
NEXT
Press
LCD screen displays
Save Image:
IMG05.BMP
LCD screen displays
Saving Image
Please wait
Press
LCD screen displays
then
Saving Image 54%
Step 2
Step 3
MENU
NEXT
Press
ZOOM/
PAN
DETAIL
Detail button
flashes red
To recall an image:
1. Press Next twice to enter the first recall menu. The LCD displays “Recall to
Back: <N/A>”. To recall an image to the front of an active signal, press Next
again, and the LCD displays “Recall to Front: <N/A>”.
In either submenu (Recall to Back or Recall to Front), use either Adjust knob
to scroll through the saved images, to the desired image.
2.
Press Next to recall the image. The LCD displays “Recalling Image Please
wait” while the image is downloaded to the display. When the image is fully
downloaded, the LCD displays the name of the image and “Recalled”, (for
example, “IMG05.bmp Recalled”). The recalled image is displayed on the
active display. Press Next to exit the Recall Image menu.