Español Italiano Français Deutsch English
59
UA-20 application guide
Recording from a keyboard
Here’s how you can send a keyboard performance as audio data to your computer, and
record it on sequencer software.
fig.keyboard.e
The sound that is input to Input jack L(MONO) will be recorded on the left channel, and
the sound that is input to R jack will be recorded on the right channel.
Use the Input volume to adjust the input level.
Check the input level on the application that you are using.
If you turn the input monitor switch to ON, the sound will be output from the
headphone jack and the master output jacks.
OUTPUT
Signal flow
Keyboard
Adjust the
input level.
Turn on if you
want to monitor.
Set this to
LINE.