Filter
Top Products
48
Getting Connected and Installing Drivers (Macintosh)
■ Installing the UA-20 driver (FreeMIDI)
Use the following procedure to install the UA-20 driver. The
included UA-20 FreeMIDI driver is an add-on module for
using the UA-20 with FreeMIDI. In order to use it, FreeMIDI
must be installed on the hard disk from which you started
up.
* Disconnect the UA-20 from the Macintosh before beginning the
installation.
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to
exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the UA-20 FM Driver - E Installer icon
(found in the Driver E - FreeMIDI folder of the
CD-ROM) to start up the installer.
4
Verify the Install Location, and click [Install].
fig.3-2_40
5
If a message like
the following is
displayed, click
[Continue].
The other currently
running applications will exit, and installation will continue.
6
A dialog box will indicate Installation completed.
Click [Restart] to restart your Macintosh.