Filter
Top Products
39
Español Italiano Français Deutsch English
Getting Connected and Installing Drivers (Windows)
fig.2-29_30
6
Set “MIDI output”.
Select [Single instrument],
and choose one of the
following from the list that
appears, and click [Apply].
7
Close the Multimedia Properties dialog box.
Click [OK] to complete the settings.
Advanced mode Standard driver mode
MIDI output EDIROL UA-20 MIDI OUT MIDI cannot be handled when
using Standard Driver mode.
For details on Advanced
mode and Standard Driver
mode, refer to Advanced
mode and Standard driver
mode (p. 16).
This completes MIDI and audio input/output destination
settings. If you installed the standard Windows driver, make
settings for the Windows volume control.
Proceed to the next section. ➝ Volume Control setting (p. 40)