Filter
Top Products
13
Names of things and what they do
fig.04-1
1.
USB indicator
This will light when you use the USB cable to connect the UA-20 to your computer,
and the computer has recognized the UA-20.
2.
USB connector
Audio signals and MIDI signals can be transferred when the UA-20 is connected via
a USB cable to your computer.
3.
MIDI connector
Connect these connectors to a MIDI device (such as a sequencer) to exchange MIDI
messages.
4.
Digital output connector
Connect a coaxial cable here when you want to digitally output an audio signal to
a digital recorder such an MD or DAT.
5.
Master output jacks
These are output jacks for analog audio signals.
6.
Headphone volume
This adjusts the volume that is output from the
Headphone jack
. It is not possible
to adjust the volume that is output from the
Master output jacks
.
7.
Input volume
This adjusts the volume at which the input signal from
Input jacks
.
8.
Headphone jack
A set of headphones can be connected here. The
Headphone jack
will output the
same sound as that of the
Master output jacks
. Sound will be output from the
Master output jacks
even when headphones are connected.
1
2345
6
7
8
91011 12