Filter
Top Products
SCSI Commands
5-94 Quantum DLT 7000 Tape System
MODE SELECT (6) / (10) Command (15h) / (55h) (continued)
Table 5–47 EEPROM Vendor Unique Page Parameters (continued)
Name Value
Rep.
Default Length
(Bytes)
Usage
HOSTCOMPSETTING
(continued)
0 = Use default compression setting (use
with PERFMODE set to 1 for best
performance with DLT 7000 tape drive
with 4MB cache)
1= Set compression setting for best
performance
2 = Set compression setting for best
compromise of performance and
compression
3 = Set compression setting for best
compression
Default compression settings are:
- Drive with an 8 MB cache, compression
= 1
- Drive with a 4 MB cache, compression
setting depends on the PERFMODE
parameter. If : PERFMODE = 0, the
compression setting is 5; PERFMODE =
1, the compression setting is 1
LDRCYCLRESET ASCII
Binary
0 1 To cause the first cartridge to be loaded if
unloading the last cartridge when the
loader product is operated in sequential
mode (if set).
LOADERLUN ASCII
Decimal
1 1 1 - 7 = LUN to report media loader
device on.
LONGXPORTPAGE ASCII
Binary
1 1 To report 18 or 6 bytes medium transport
element status descriptor if parameter is
on or off.