Filter
Top Products
SCSI Commands
Quantum DLT 7000 Tape System 5-9
Table 5–5 DATA-Phase Command Contents
Command Length in CDB Data Out
(To Drive)
Data In
(To Initiator)
ERASE 0
INQUIRY Allocation --- Standard Inquiry or a
Vital Product Data
page
LOAD UNLOAD 0 --- ---
LOCATE 0 --- ---
LOG SELECT Parameter List (must
be 0)
--- ---
LOG SENSE Allocation --- Log Page
MODE SELECT (6) / (10) Parameter List Mode Parameter
Header (4) Block
Descriptor (8) Page(s)
---
MODE SENSE (6) / (10) Allocation --- Mode Parameter
Header (4) Block
Descriptor (8) Page(s)
PREVENT ALLOW
MEDIUM REMOVAL
0 --- ---
READ Transfer --- Data
READ BLOCK LIMITS Allocation --- Block Length Limits
READ BUFFER Allocation --- Buffer Offset and
Allocation Length
READ POSITION Allocation --- Position Identifier or
SCSI Logical Address
RECEIVE DIAGNOSTIC
RESULTS
Allocation --- Diagnostic Page
RELEASE UNIT 0 --- ---
REQUEST SENSE Allocation --- Sense Data (18)
RESERVE UNIT 0
(Extent List Option
not supported)
--- ---