Filter
Top Products
SCSI Commands
5-28 Quantum DLT 7000 Tape System
LOAD UNLOAD Command (1Bh) (continued)
NOTES
The sequential loading feature of the loader can be enabled/disabled
by modifying the ENALDRAUTOLD and DISLDRAUTOLDMC
parameters of EEPROM (mode page 3Eh of the MODE SELECT
command).
A media loader does not affect the tape drive’s processing of the LOAD
portion of the LOAD UNLOAD command.
Bit
Byte
7 6 5 4 3 2 1 0
0 Operation Code (1Bh)
1 Logical Unit Number Reserved Immed
2 - 3 Reserved
4 Reserved EOT Re-Ten Load
5 Unused Reserved Flag Link
Figure 5–11 LOAD UNLOAD Command Descriptor Block - Data Format