Filter
Top Products
SCSI Commands
5-42 Quantum DLT 7000 Tape System
LOG SENSE Command (4Dh) (continued)
5.8.1 Error Detection Summary in LOG SENSE Command Descriptor Block
The following conditions constitute errors detected by the drive relating to the
LOG SENSE command descriptor block. The request sense data is set to
ILLEGAL REQUEST, INVALID FIELD IN CDB.
Error conditions occur when:
• A page is not supported
• The parameter pointer is larger than the highest numbered parameter on the
page
• The SP bit is set to 1
• The Allocation Length is smaller than the data being returned by the target.
• PPC bit set to 1