Filter
Top Products
SCSI Commands
Quantum DLT 7000 Tape System 5-21
INQUIRY Command (12h) (continued)
Table 5–10 Vendor Unique Inquiry Data Page - Field Descriptions
Field Name Description
Product Family This field indicates the data density of each of the DLT tape drives as
follows:
Bit
0
1
2
3
5
6
7
Drive Density
Not Specified
2.6 GB
6.0 GB
10.0 / 20.0 GB
20.0 / 40.0 GB
15.0 / 30.0 GB
35.0 / 70.0 GB
Released Firmware This flag differentiates between released and test versions of
firmware. When set to 1, indicates released code (Vxxx); 0 indicates
field test code (Txxx). Released code has no minor firmware version
number (byte 38 = 0). Field test and engineering versions of code
have non-zero minor firmware version numbers for tracking
purposes.
… Version # These fields display the various version numbers in binary, not ASCII
Firmware Personality Numeric indicator of firmware personality. For example, firmware
personality of 4 indicates OEM family, 15 indicates OML family, and
18 indicates OMX family.
Firmware Subpersonality Set to 1, indicating standard SCSI device firmware.
Loader Present Set to 0 indicates no loader present. Non-zero indicates loader is
present.
Library Present Set to 0 indicates no library present. Non-zero indicates library is
present.
Module Revision A four byte ASCII string representing the revision level of the tape
drive’s module (the controller PCBA attached to the tape drive).