Filter
Top Products
SCSI Commands
5-26 Quantum DLT 7000 Tape System
INQUIRY Command (12h) (continued)
Table 5–13 Subsystem Components Revision Page - Field Descriptions
Field Name Description
Product Family This field indicates the data density of each of the DLT tape drives as
follows:
Bit
0
1
2
3
5
6
7
Drive Density
Not Specified
2.6 GB
6.0 GB
10.0 / 20.0 GB
20.0 / 40.0 GB
15.0 / 30.0 GB
35.0 / 70.0 GB
Released Firmware This flag differentiates between released and test versions of firmware.
When set to 1, indicates released code (Vxxx); 0 indicates field test
code (Txxx). Released code has no minor firmware version number
(byte 38 = 0). Field test and engineering versions of code have non-
zero minor firmware version numbers for tracking purposes.
… Version # These fields display the various version numbers in binary, not ASCII
Vendor Unique Subtype Identification of product.
Firmware Personality Numeric indicator of firmware personality. For example, firmware
personality of 4 indicates OEM family, 15 indicates OML family, and 18
indicates OMX family.
Firmware Subpersonality Set to 1, indicating standard SCSI device firmware.
Loader Present Set to 0 indicates no loader present. Non-zero indicates loader is
present.
Library Present Set to 0 indicates no library present. Non-zero indicates library is
present.
Module Revision A four byte ASCII string representing the revision level of the tape
drive’s module (the controller PCBA attached to the tape drive).