Filter
Top Products
3 Press the corresponding button to se-
lect the desired equalizer curve.
Button Equalizer curve
CLRTY Clarity
RHYTM Rhythm
SENS Sensitive
NRRW Narrow
FLAT Flat
CSTM1 Custom 1
CSTM2 Custom 2
! CUSTOM1 and CUSTOM2are adjusted
equalizer curves that you create.Adjust-
ments can bemade with a 13-band graphic
equalizer.
! When FLATis selected no supplement or
correction is madeto the sound. This is
useful to checkthe effect of the equalizer
curves by switching alternatively between
FLATand a set equalizer curve.
Notes
! You canalso sequentially select an equalizer
curve by pressing c or d.
! If you do notoperate the function within about
eight seconds, thedisplay is automatically re-
turned.
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of FLAT, can be adjusted to a fine
degree (nuance control).
1 Press AUDIO and then press EQ 1 to se-
lect the graphic equalizer mode.
2 Press c or d to select an equalizer
curve.
3 Press a or b to adjust the equalizer
curve.
Each press of a or b increases or decreases
the equalizer curve respectively.
+6 5 (or 6) is displayed as the equalizer
curve is increased or decreased.
# The actual rangeof the adjustments are differ-
ent depending onwhich equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0 cannot beadjusted.
Adjusting 13-band graphic
equalizer
For CUSTOM1 and CUSTOM2 equalizer
curves, you can adjust the level of each band.
! A separate CUSTOM1 curve can be cre-
ated for each source. (The built-in CD
player and the multi-CD player are set to
the same equalizer adjustment setting
automatically.) If you make adjustments
when a curve other than CUSTOM2 is se-
lected, the equalizer curve settings will be
memorized in CUSTOM1.
! A CUSTOM2 curve can be created com-
mon to all sources. If you make adjust-
ments when the CUSTOM2 curve is
selected, the CUSTOM2 curve will be up-
dated.
1 Recall the equalizer curve you want to
adjust.
See Recalling equalizer curves on the previous
page.
2 Press AUDIO and then press EQ 2 to se-
lect the 13-band graphic equalizer mode.
3 Press c or d to select the equalizer
band to adjust.
Each press of c or d selects equalizer bands
in the following order:
Audio Adjustments
En
51
English
Section
11