Filter
Top Products
Playing a CD
1
2
3
FORM1
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player.More advanced
CD operation is explained starting on the next
page.
1 Disc number indicator
Shows the disc currently playing.
2 Track number indicator
Shows the track currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Rotate SOURCE to select the multi-CD
player.
Rotate SOURCE until you see Multi-CD dis-
played.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press a or b to select a disc.
A disc number for which there is no disc will
be skipped.
# You canuse the buttons 16 (or712) to se-
lect a disc directly.
4 To perform fast forward or reverse,
press and hold c or d.
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! When the multi-CD player performs the pre-
paratory operations, Ready is displayed.
! If the multi-CD player doesnot operate prop-
erly, an error messagesuch as ERROR-11
may be displayed.Refer to the multi-CD player
owners manual.
! If there areno discs inthe multi-CD playerma-
gazine, No discis displayed.
! When you selecta CD TEXT disc on aCD TEXT
compatible multi-CD player, the disc andtrack
titles begin to scroll to theleft auto-
matically.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
Selecting a disc directly
You can use the buttons 16 (or 712) to se-
lect a disc directly.
1 Press NEXT to display 16 (or 712).
Press NEXT until 16 (or 712) appears.
2 Press any of the buttons 16 (or 712)
to select a disc located at 1 to 6 (or 7 to 12).
Multi-CD Player
En
32
Section
08