Filter
Top Products
Note
When the randommode is exited while random
play is on,RDM appears on the basicdisplay.
Scanning tracks of a MD
Scan play lets you hear the first 10 seconds of
each track on the MD.
! When playing a group-recorded MD, while
you are using Group repeat, the beginning
of each track in the selected group plays
for about 10 seconds. When you are using
Disc repeat, the beginning of the first track
of each group is played for about 10 sec-
onds.
1 Press FUNC and then press SCAN to se-
lect the scan mode.
2 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track is played.
# When playing agroup-recorded MD, the first
10 seconds ofeach track of the current group(or
the first trackof each group) is played.
3 When you find the desired track (or
group) press SCAN to turn scan play off.
The light goes off. The track (or group) will con-
tinue to play.
# If the scan modeis automatically canceled,
select the scan modeagain.
Notes
! After scanning of anMD is finished, normal
playback of thetracks will begin again.
! When the scanmode is exited while scanplay
is on, SCANappears on the basic display.
Selecting tracks from the
track title list
The track title list lets you see the list of track
titles on an MD and select one of them for
playback.
1 Press FUNC and then press T.LIST to se-
lect the track title list mode.
2 Press NEXT to display the desired track
title.
Press NEXT until the desired track title ap-
pears.
3 Press the corresponding number button
to select the desired track title.
That selection will begin to play.
Note
You canalso use c, d and ato select and play
the desired tracktitle.
Selecting groups from the
group title list
Group title list lets you see the list of group ti-
tles and select one of them to playback.
1 Press FUNC and then press G.LIST to se-
lect group title list mode.
2 Press NEXT to display the desired group
title.
Press NEXT until the desired group title ap-
pears.
Built-in MD Player
En
30
Section
07