Filter
Top Products
Note
When the randommode is exited while random
play is on,RDM appears on the basicdisplay.
Scanning CDs and tracks
While you are using Disc repeat, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
Magazine repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNC and then press SCAN to se-
lect the scan mode.
3 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track of the current disc (or the first track
of each disc) is played.
4 When you find the desired track (or
disc) press SCAN to turn scan play off.
The light goes off. The track (or disc) will con-
tinue to play.
# If the scan modeis automatically canceled,
select the scan modeagain.
Notes
! After track or discscanning is finished, nor-
mal playback ofthe tracks will begin again.
! When the scanmode is exited while scanplay
is on, SCANappears on the basic display.
Selecting tracks from the
track title list
The track title list lets you see the list of track
titles on a CD TEXT disc and select one of
them for playback.
1 Press FUNC and then press T.LIST to se-
lect the track title list mode.
2 Press NEXT to display the desired track
title.
Press NEXT until the desired track title ap-
pears.
3 Press the corresponding number button
to select the desired track title.
That selection will begin to play.
Notes
! You canalso use c, d and ato select and
play the desiredtrack title.
! Only when playinga CD TEXT disc on aCD
TEXTcompatible multi-CD player, you can
switch to this mode.
Selecting discs from the
disc title list
Disc title list lets you see the list of disc titles
that have been entered into the multi-CD
player and select one of them to playback.
1 Press FUNC and then press D.LIST to se-
lect the disc title list mode.
Multi-CD Player
En
34
Section
08