Playing a MP3/WMA
1
2
3
4
5
FORM1
These are the basic steps necessary to play an
MP3/WMA with your built-in CD player. More
advanced MP3/WMA operation is explained
starting on the next page.
WARNING
Do not usewith the front panel left open, after
ejecting a CD-ROM. If you do leave itopen, it may
result in injury in the eventof an accident.
1 MP3/WMA indicator
Shows when the MP3/WMA file is playing.
2 Folder number indicator
Shows the folder number currently playing.
3 Track number indicator
Shows the track (file) currently playing.
4 Bit rate indicator
5 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
1 Press CD EJECT.
CD loading slot appears.
# After a CD-ROM has beeninserted, rotate
SOURCE to selectthe built-in CD player.
2 Insert a CD-ROM into the CD loading
slot.
Front panel is closed automatically, and play-
back will start.
CD loadingslot
# You caneject a CD-ROM by pressing
CD EJECT.
3 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
4 Press a or b to select a folder.
# You cannotselect a folder that doesnot have
an MP3/WMA filerecorded in it.
# Toreturn to folder 01(ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder02.
5 To perform fast forward or reverse,
press and hold c or d.
# This is fast forward andreverse operation only
for the file beingplayed. This operation iscan-
celed when theprevious or next file is reached.
# If you select thesearch method to
Rough search, pressing and holdingc or d en-
ables you tosearch every ten track inthe current
folder.(Refer to Selectingthe search method on
page 26.)
6 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
MP3/WMA Player
En
23
English
Section
06