Filter
Top Products
2 Press RPT to select the repeat range.
Press RPT until the desired repeat range ap-
pears in the display.
! Folder repeat Repeatthe current folder
! Trackrepeat Repeat just the current
track
! Disc repeat Repeat all tracks
Notes
! If you select other folder duringrepeat play,
the repeat play rangechanges to Disc repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, therepeat play
range changes to Folderrepeat.
! When Folder repeat is selected,it is not pos-
sible to play backa subfolder of that folder.
! When the repeat modeis exited, either T.RPT
(one-track repeat) orFOLDER PRT (folder re-
peat) may appearon the basic display.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
Folder repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNC and then press RDM to se-
lect the random mode.
3 Press RDM to turn random play on.
The light illuminates. Tracks will play in a ran-
dom order within the previously selected
Folder repeat or Disc repeat ranges.
# Toturn random play off,press RDM again.
Note
When the randommode is exited while random
play is on,RDM appears on the basicdisplay.
Scanning folders and tracks
While you are using Folder repeat, the begin-
ning of each track in the selected folder plays
for about 10 seconds. When you are using
Disc repeat, the beginning of the first track of
each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNC and then press SCAN to se-
lect the scan mode.
3 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track of the current folder (or the first
track of each folder) is played.
4 When you find the desired track (or
folder) press SCAN to turn scan play off.
The light goes off. The track (or folder) will con-
tinue to play.
# If the scan modeis automatically canceled,
select the scan modeagain.
Notes
! After track or folder scanningis finished, nor-
mal playback ofthe tracks will begin again.
! When the scanmode is exited while scanplay
is on, SCANappears on the basic display.
Pausing MP3/WMA playback
Pause lets you temporarily stop playback of
the MP3/WMA.
MP3/WMA Player
En
25
English
Section
06